Last Updated： Aggregation Period:Jan 28, 2026～Feb 24, 2026
This ranking is based on the number of page views on our site.
1～30 item / All 34 items
CoreMorrow piezo objective scanner
The P76.Z100 piezoelectric objective scanner features a large load capacity of up to 0.5kg, a Z-axis linear motion range of up to 100μm, a flexible hinge mechanism, no friction, good linearity, and high closed-loop positioning accuracy.
Can be measured accurately in mg/L (or g/L) O2 with minimal operation.
The COD measurement set includes the main measuring instrument, COD test tubes (25 pieces, with one set each for low range and medium range), reactor RD125, and vial stand.
There is a very high correlation between the measurement values according to JIS standards and the wastewater from various business sites.
This measurement method uses the same reaction conditions for pollutants and potassium permanganate as JIS K 0102, and the volumes of the sample and reagents are conducted at one-twentieth of the JIS method. Heating at 100°C for 30 minutes is performed using a reactor instead of a water bath, and the amount of consumed permanganate ions is determined by measuring the decrease in absorbance with a photoLab 6100 water quality meter instead of using titration, displaying the COD concentration. Since the reaction conditions of this method are exactly the same as those of the JIS method, there is a very high correlation between the measurement values obtained by the JIS method and those obtained using the photoLab 6100.
Defects in expansion can also be measured! SemiScope enables spectral line analysis.
The "SemiScope PLIS-TEC" is a groundbreaking measurement device for the study of crystal defects using photoluminescence (PL). It allows for the simultaneous measurement of spectra from a selected line segment in a PL imaging image, dividing that segment into 1000 points. Additionally, by spectrally analyzing the line segment, it can accurately measure spectra even for defects that are difficult to pinpoint, such as base plane transitions. 【Features】 ■ Supports spectral line analysis ■ For the study of crystal defects ■ The excitation light density is approximately three orders of magnitude lower than that of conventional PL spectral measurements ■ Capable of measuring extended defects ■ Accurately measures spectra even for defects that are difficult to locate *For more details, please refer to the PDF document or feel free to contact us.
High correlation with the JIS method!
Due to the same reaction conditions as the JIS method, a high correlation can be obtained. The amount of reagent used is significantly reduced.
Easily measure impact force on-site! A compact and lightweight measuring device compatible with force and pressure measurements.
The "CBSF-75 Series" is a collaborative robot impact force measuring device suitable for measuring impact forces in the field, such as during product development testing and pre-operation inspections of robots. We offer two types of devices: the impact force measurement "CBSF-75 Basic" and the gripper measurement "CBSF-75 Gripper." Additionally, we have the measurement cart "KDMG-STD2," which simulates the human body for measuring impact forces on body parts as specified in ISO/TS15066. This measurement cart is used by securing the collaborative robot impact force measuring device "CBSF-75 Basic" or the CoboSafe series measuring devices. 【Features (KDMG-STD2)】 ■ The collaborative robot impact force measuring device can be fixed at any height from the calf to the neck to match human body parts. ■ The stopper can be set to fixed or free. ■ The top plate can also accommodate "CBSF-75 Basic (F-500 Basic)" and CoboSafe series devices. *Additional fixed mounts are required. *For more details, please refer to the PDF document or feel free to contact us.
Contributing to development and prosperity! We provide environmentally friendly products and aim to be your best partner.
Our company provides products that contribute to the realization of a comfortable life and environmentally friendly products, aiming to be your best partner and contributing to your development and prosperity. We offer antenna design, matching, layout confirmation, and sample prototyping. Sample prototyping can be responded to quickly, with samples available within four weeks. We also support the entire process from the initial product development to completion. We can respond swiftly to diverse needs, so please feel free to consult us when needed. 【Main Products】 ■ Antennas and antenna modules ■ Piezoelectric ceramic elements and modules *For more details, please refer to the PDF materials or feel free to contact us.
Ultra-small (13 x 15 mm), low power consumption
GPS/QZSS + GLONASS + Galileo + SBAS Antenna Module 【Specifications】 ◆ Model: YIC51513PGMGG-33 ◆ Dimensions: 13 x 15 x 6.8 mm ◆ Internal Memory: FLASH ◆ VCC: 3.3V ◆ PPS ◆ Interface: UART
P35 Piezo Deflector, Piezo Steering Mirror with 43mrad tilt
Designed for high large-angle deflection applications, P35 Piezo Tip/Tilt Platforms provide beam deflections up to 86mrad (approximately 4.9 degrees, 17700"), making them ideal for fast deflection applications with high precision and large angle.
It is a pocket-sized foldable infrared thermometer/center temperature gauge that can measure non-contact surface temperature and center temperature.
It is equipped with a K-type thermocouple sensor with a diameter of φ3.3mm and a length of 120mm. It can handle various temperature measurements with one device, such as checking the acceptance temperature of raw materials and measuring the surface temperature of products as an infrared thermometer, as well as measuring the core temperature of products as a K-type thermocouple. The emissivity can also be adjusted according to the measurement target for non-contact temperature measurements.
Super easy and super beautiful! It visualizes bacteria of 10 microns at a size of about 6 cm.
The "P-Scope V" is a digital phase contrast microscope that can vividly display the contours of observed objects. It allows for high-contrast observation of items that typically have unclear outlines, such as objects in liquids. Even tiny subjects like oral bacteria can be captured with sharp images. Additionally, adjustments for color tone and brightness are fully automatic. No extra operations are needed, so you can start observing right away. 【Features】 ■ Phase contrast method that clearly displays the contours of observed images ■ Total magnification: approximately 5,800 times (29-inch monitor) ■ High-precision, high-rigidity mechanical stage adopted ■ High quality and high performance ■ Super easy and super clear *For more details, please refer to the PDF materials or feel free to contact us.
Just display the guideline line for penetration speed! Anyone can measure at a constant speed!
The 『DIK-5532』 is a digital penetration soil hardness meter capable of measuring soil hardness from 1cm to 90cm (in 1cm increments). Measurement data is obtained using a dedicated data display unit (featuring a touch panel). Bluetooth communication eliminates the need for cumbersome cable wiring. Additionally, by using an optional mobile printer, it is possible to print graphs and measurement data on-site. 【Features】 ■ Measures soil hardness from 1cm to 90cm (in 1cm increments) ■ No cable wiring required ■ Capable of printing measurement data ■ Measurements can be taken at a constant speed ■ Easy to operate *For more details, please refer to the catalog or feel free to contact us.
●Adopts automatic power-off function ●Quick response with a small-diameter probe
The adoption of a needle probe allows for the quick measurement of the center temperature of meat patties, chicken, and fish fillets as specified in the FDA Food Code 4-302.12 (B). This thermometer, M994M-2219016D, is NSF certified and can assist in complying with HACCP food safety standards. It is also an ideal tool for use in any facility involved in food preparation, cooking, maintenance, serving, storage, as well as distribution centers, refrigeration, and food processing facilities. It can be used to comply with FDA Food Code 4-203 and to meet HACCP planning and requirements. The M994M-2219016D features a sophisticated needle probe designed to meet industry standards for measurement accuracy, durability, and display visibility. It meets the specifications required for professional use, such as in commercial settings, and is designed and manufactured to meet stringent performance specifications.
Designed as part of the CoboSafe series! Ideal for measuring gaps.
The "CBSF-XS" is a collaborative robot impact force measurement device that is suitable for measuring the transitional and quasi-static forces of collaborative robots, as well as the impact forces in the gaps of collaborative robots. Due to its low measurement surface height, it can measure impact forces with a width of 10mm or more. The bright light signal transmitter provides information about the operational status of the measurement device, so there is no need to check the display. 【Features】 ■ Ultra-compact ■ Built-in display ■ Bright and easy-to-read status indication ■ Easy operation ■ User-friendly menu *For more details, please refer to the PDF document or feel free to contact us.
Detection of paper re-delivery, edge position control, distance measurement, gas flow measurement, etc.! Solutions can also be provided through custom support.
Unicron has a consistent production line that includes the unique formulation of ceramic materials, the production of piezoelectric elements, and the assembly of air transducer finished products. In each process, we adjust the mechanical and electrical performance of the transducers. We are advancing product development by fully utilizing the know-how we have cultivated over many years. ■ Application Examples The liquid level remaining in tanks and similar containers is measured using an integrated ultrasonic transducer that calculates using ToF (Time of Flight). *For more details, please download the PDF document or feel free to contact us.
Simultaneously receive other frequency GNSS signals! Achieves high resistance to electromagnetic interference and reflected signals.
The "GNSS Castle Antenna" is an integrated, built-in ceramic antenna. It is thin, has excellent axial ratio, and can simultaneously receive GNSS signals at different frequencies. With high reception capability, it can achieve lane-level positioning accuracy outdoors. Additionally, due to its circular polarization characteristics, it provides high resistance to multipath, electromagnetic interference, and reflected signals even in the presence of tall buildings in large cities. 【Features】 ■ Integrated design ■ Thickness of 4-8mm ■ Axial ratio < 2dB ■ Capable of simultaneous reception of GNSS L1 & L2 / L1 & L5 *For more details, please refer to the PDF document or feel free to contact us.
Quickly measure the distance to the detected object! It is possible to detect and measure the hardness of solids, the transparency of liquids, and powders of different surface colors.
Our company handles "ultrasonic transducers" used for short-range object detection and measurement. Ultrasonic detection can identify and measure objects of any type or characteristic. It can detect and measure the hardness of solids, the transparency of liquids, and powders of different surface colors. Recently, it has been used in a wide range of fields, including heavy load detection, edge position control, flow meters, and medical devices. 【Features】 ■ Piezoelectric ceramics and matching layers are produced in-house ■ Active patent acquisition ■ High sensitivity with minimal variation in processes ■ Excellent reliability *For more details, please refer to the PDF materials or feel free to contact us.
Detection and measurement are possible regardless of the type or characteristics of the object! We also supply to copier manufacturers in Japan and fish finder manufacturers in Europe and the United States.
Our company handles "ultrasonic transducers" used for short-distance object detection and measurement. Ultrasonic detection can identify and measure objects of any type or characteristic. It can detect and measure the hardness of solids, the transparency of liquids, and powders of different surface colors. We have extensive experience across a wide range of industries, including major domestic copier manufacturers and fish finder manufacturers in Europe and the United States! Recently, it has also been used for heavy load detection, edge position control, flow meters, and medical devices. [Features] - Piezoelectric ceramics and matching layers are produced in-house - Active patent acquisition - High sensitivity with minimal variation in processes - Excellent reliability *For more details, please refer to the PDF document or feel free to contact us.
Emergency Water Quality Testing Kit for Drinking Water Suitability Assessment
On-site water quality testing can be easily and accurately conducted to determine the suitability for drinking. It is also ideal for emergency situations in addition to regular water quality testing.
Reacts only to hydrogen! Initial detection speed is under 1 second! No false signals, eliminating downtime at work!!
The HY-ALERTA 600 model from H2scan is a hydrogen monitor that exclusively detects hydrogen gas leaks. By using a Pb/Ni alloy semiconductor sensor, it reacts only to hydrogen. It can accurately detect hydrogen gas and measure its concentration without interference from multiple background gases or combustible gases. Additionally, it does not produce any false signals. The monitor can be installed on the ceiling or wall, and by connecting the sensor and controller via RS422, it allows for control from a remote location.
Comprehensive catalog of measuring instruments. This catalog features devices for measuring various environments.
The "Custom Co., Ltd. Measurement Instruments Comprehensive Catalog" features various devices for measuring natural and water quality environments, including a "Weekly Timer" that saves electricity and directly contributes to eco-friendliness, and an "Eco Keeper" that measures power consumption and monitors the greenhouse gas (CO₂) emissions generated by producing that power. We offer products that assist your efforts towards environmental sustainability. 【Featured Products】 ○ Ultimate Environmental Measurement Instrument Series ○ Wireless-Compatible Device Series ○ Medical Devices ○ Energy-Saving and Environmental Measurement Instruments ○ Thermometers and more For more details, please contact us or download the catalog.
In addition to measuring the absorbance of nitrogen, phosphorus, etc., pH (electrode type) and turbidity can also be measured.
It is a spectrophotometer that excels in accuracy and reproducibility, and is easy to operate.
It is a high-speed coin counting machine that can count 3,000 coins per minute and can hold 6,000 coins, even in a desktop type.
Counts coins at a high speed of 3,000 pieces per minute. (Compatible with new and old 500 yen coins)
An all-in-one type high-precision linear gauge with the signal processing unit built into the main body of Φ20!
This is an all-in-one type high-precision linear gauge with a Φ20 body that integrates the signal processing unit. It outputs A/B phase pulse signals simply by supplying power. Inside the sensor, a magnetic tape with high precision alternating N and S poles and a magnetoresistive element are implemented, allowing for non-contact detection of the magnetic pattern, and high-precision pulse signals are output from the obtained SIN/COS signals using a dedicated LSI. *For more details, please contact us or download the catalog.
![Phase difference, biological microscope [UT503-PH]](https://image.mono.ipros.com/public/product/image/997/2000819576/IPROS49766300946406789829.jpeg?w=280&h=280)
★High-performance phase contrast microscope. ★Plan achromatic objective lens ★Includes bright field, dark field, and polarized light observation, etc.
It is a phase contrast microscope. - High quality that withstands use for research and high-level amateurs. - Excellent optical and mechanical performance. - Options for bright field observation, dark field observation, and polarized observation are also available. - High cost performance. * The camera shown in the product photo (blue) is sold separately.
It is possible to measure light sources with 2π and 4π luminous distribution in accordance with the LM-78 and LM-79 standards set by IESNA (Illuminating Engineering Society of North America) for LED measurement.
【Features】 ○ Selection of integrating sphere size available (from 2 inches to 3m (120 inches)) ○ Long-term stable measurements possible with high weather-resistant materials for the inner surface of the integrating sphere ○ Capable of measuring light sources up to 100,000 lumens ○ Support fixtures and sockets available for various light sources ○ Installation of standard LED compatible holders is possible
It is now possible to connect with the central thermometer.
Records Required for HACCP In HACCP hygiene records, it is necessary to document and manage three items: "Entry Records," "5S Records," and "CCP Records." The "Entry Records" are essential because employees handling food can become sources of contamination, potentially leading to food poisoning incidents. This necessitates the completion of checklists for employees. The "5S Records" are a checklist of the fundamental 5S practices—"Sort," "Set in order," "Shine," "Standardize," and "Sustain"—which are crucial for improving product safety. The "CCP Records" are particularly important processes that must be managed to eliminate hazards that threaten food safety and hygiene, such as monitoring core temperature and conducting swab tests.
Quantifying the histamine levels in raw fish meat, its processed products, and fermented foods. For product testing to prevent food poisoning, etc.
Histamine is an active amine produced from the amino acid histidine. Freshness-degraded red fish and fish sauce, in particular, can contain high concentrations of histamine, which can cause a type of food poisoning resembling an allergy known as histamine poisoning. Our company offers food histamine testing to report the histamine concentration in fish meat and its processed products. 【Features of the Test】 ◆ Quantification of "histamine concentration" in the sample Histamine poisoning has been reported to occur when an adult consumes between 22 to 320 mg of histamine. Additionally, the CODEX committee has established that the average histamine concentration in a sample should be below 100 mg/kg as a spoilage standard. Our company quantifies the histamine concentration in food using an enzymatic method. ◆ Use of measurement kits certified by the international certification organization AOAC-RI AOAC-RI is an international organization for the evaluation of analytical methods. Since our company uses measurement kits certified by AOAC-RI PTM, they can also be utilized by customers considering export to overseas markets. *For more details, please request a catalog or view the PDF data from the download section.
![[Market Report] Global E-Passport Market](https://image.mono.ipros.com/public/product/image/ab3/2001053100/IPROS20406745234541726333.jpeg?w=280&h=280)
The global market for electronic passports is rapidly expanding, and it is predicted to reach 211.5 billion USD by 2031.
The global electronic passport market is experiencing unprecedented rapid growth, with revenues reported at approximately 28.8 billion USD in 2022. According to industry forecasts, this remarkable growth trajectory is expected to continue, with the market projected to reach an astonishing size of 211.5 billion USD by 2031. This robust expansion is supported by an extraordinary compound annual growth rate (CAGR) of 24.8% during the forecast period from 2023 to 2031. E-passports, also known as electronic passports, symbolize the cutting-edge evolution of travel documents. These advanced passports utilize electronic technology to enhance security measures and streamline immigration procedures. At the heart of the electronic passport is a microchip that securely stores critical biometric information, such as facial recognition data, fingerprints, digital photographs, and personal information of the passport holder. You can check the application method by clicking the [PDF Download] button or apply directly through the related links.
